The HARP ATTACK is designed to provide true power tube distortion in a pedal. This pedal is not your typical tube preamp that uses a triode; this tube uses a subminiature beam power tube, the same type tube as a 6V6 to provide the tone of an overdriven single ended amp. It produces a fat punchy tone that can be set with the exact amount of overdrive desired. You can certainly tell there is a tube inside of this pedal. The pedal is designed with a high impedence input buffer providing 10M ohms of resistance to get the best tone from your crystal, CM or other high impedence microphone. A DRIVE control sets the amount of power tube saturation desired, a trebble cut TONE control trims unwanted highs and an output VOLUME control sets the output level. The output of the pedal is also buffered with an FET amp that adds extra gain to extend the life of the tube, this gain is controled with the pedal volume control. The NOS subminiature tube is slightly microphonic but it goes away shortly after turning the pedal on, it is not noticable in a live situation and the pedal has to be knocked to be effected. Randy Landry, the Lone Wolf Blues Co, dedicated harmonica effects.
Requires 2 x 9 volt batteries or an 18 volt DC power.
The 18 volt power supply (PSU) especially for the Harp Attack is available separately in UK and EU versions.
This video is for demonstration purposes only, the sound you get from the pedal will depend upon the equipment (microphone and amp etc) that you use.